Audio Note AN/E Series Owner's Information

Hide thumbs Also See for AN/E Series:

Website

www.audionote.co.uk

E-Mail

info@audionote.co.uk

Telephone

+44 (0) 1273 731498

Manual Version 1.3 - February 2007

Page 1

Table of Contents

Need help?

Do you have a question about the AN/E Series and is the answer not in the manual?

Page 2 Table of Contents Section 1: Introduction ................................3 Section 2: Assembly................................4 Parts List....................................4 Assembly Instructions................................5 Copyright © 2006 Audio Note (UK) Limited Page 2 Website www.audionote.co.uk E-Mail info@audionote.co.uk Telephone +44 (0) 1273 731498...
Page 3: Section 1: Introduction
The AN/E Series Speaker Stands are a high mass design and are specially designed for the AN/E range of Audio Note speakers. These stands can, however, be used with speakers from other manufacturers as long as such speakers are of similar dimensions.
Page 4: Section 2: Assembly
2x Allen keys (or hex keys). The larger one is used to tighten both the top plate and bottom plate retaining screws. The smaller one is used to adjust the top plate spikes. Copyright © 2006 Audio Note (UK) Limited Page 4 Website www.audionote.co.uk E-Mail info@audionote.co.uk...
Page 7 The stands should present a very solid foundation for your speakers. If they can be rocked from side to side, you may need to re-adjust the bottom spikes to level them. We wish you many years of happiness with this product. Copyright © 2006 Audio Note (UK) Limited Page 7 Website www.audionote.co.uk...