Advertisement
Quick Links
Advertisement
Related Manuals for Audio Note AZ-TWO
Summary of Contents for Audio Note AZ-TWO
- Page 1 AZ-TWO LOUDSPEAKERS OWNERʼS INFORMATION ...
-
Page 2: Table Of Contents
CONTENTS 1) CE DECLARATION OF CONFORMITY DISPOSAL INTRODUCTION 3) OVERVIEW 5) UNPACKING AND INSTALLATION 7) CONNECTION 8) CONNECTION TO AMPLIFIER 9) OPERATION BEDDING IN CLEANING TECHNICAL SPECIFICATIONS WARRANTY INFORMATION CONTACT INFORMATION... -
Page 3: Disposal
BS EN 60065 in accordance with the regulations 73/23/EEC, 89/336/EEC (from 1 January 1997) CE 94 Peter Qvortrup, Director Audio Note (UK) Limited 25 Montefiore Road Hove East Sussex BN3 1RD United Kingdom... -
Page 4: Introduction
INTRODUCTION Thank you for purchasing this Audio Note (UK) product. With the correct care it should give you many years of pleasure and enjoyment. Please take the time to read all of the information in this manual before connecting your new component to an electrical supply or your system, to ensure both your safety and satisfaction. - Page 5 AZ-TWO LOUDSPEAKERS The AZ-TWO is a floor standing, rear loaded, folded quasi parabolic horn design with a rear facing mouth, and uses two drive units per cabinet. It is very efficient and offers the amplifier an easy ʻloadʼ, making it highly suitable for our range of superior quality, low powered valve amplifiers.
- Page 6 We at Audio Note are keenly aware of this and have deliberately chosen drive units whose sonic signatures are as closely matched as possible. This has led us to favour good, old fashioned paper for the woofer cone and impregnated silk for the dome tweeter.
- Page 7 The rear ported enclosure of the AZ-TWO has been designed to be placed close to room boundaries (where the bass performance is augmented significantly by the additional reinforcement from the nearby walls).
- Page 8 / wrench to lock the nuts in place. If you experience any difficulty positioning your AZ-TWO satisfactorily, please consult your Audio Note (UK) Dealer, who will be happy to assist you. Alternatively, please contact us directly.
- Page 9 ENSURE THAT IT IS DISCONNECTED FROM THE MAINS SUPPLY! Choose loudspeaker cables that are long enough to comfortably reach from your amplifier to the AZ-TWO without stretching or pulling tightly; it is always better to have a loudspeaker cable that is too long rather than too short! On the rear of each loudspeaker are two pairs of binding posts.
- Page 10 If your amplifier is equipped with multiple loudspeaker output terminals, consult the manual for the unit to ascertain the appropriate connection regime. The facility to split the crossover of the AZ-TWO allows the speakers to be operated in a bi-wired or bi-amplified mode. The crossovers are split by removing the connecting links between the HF and LF terminals on the rear of the speaker.
-
Page 11: Bedding In
BEFORE the amplifier; to protect your AZ-TWO loudspeakers from damage, always make sure the amplifier is the LAST piece of equipment to be switched on and the FIRST to be switched off. -
Page 12: Technical Specifications
900mm (h) x 250mm (w) x 300mm (d) UNIT DIMENSIONS per loudspeaker SHIPPING DIMENSIONS 950mm (h) x 300mm (w) x 350mm (d) (ORIGINAL PACKAGING) per loudspeaker Due to Audio Note (UK)ʼs ongoing research and development program, NOTE specifications are subject to change without notice. -
Page 13: Warranty Information
Audio Note (UK) warrants this product to be free from defects in materials and workmanship for two years from the original date of purchase from an appointed Audio Note (UK) dealer, and agrees to covers the cost of parts and associated labour required to correct such defects, subject to terms & conditions. -
Page 14: Contact Information
CONTACT INFORMATION If in the future your Audio Note (UK) product requires servicing, or if you require technical support or have any questions regarding this or any of our other products, please contact your local Audio Note (UK) dealer. ...
Need help?
Do you have a question about the AZ-TWO and is the answer not in the manual?
Questions and answers