ATN PS-40 Operator's Manual page 3

Night vision front sights
Hide thumbs Also See for PS-40:
Table of Contents

Advertisement

SAFETY SUMMARY
STUDY CAREFULLY THIS MANUAL BEFORE TURNING ON
AND OPERATING THIS PRODUCT.
CAUTIONS
The ATN PS-40 night vision unit is a precision electron-optical
instrument and requires careful handling. To provide safe use of
the sight the following instructions should be observed:
• Do not dismantle the unit.
• Keep the unit clean; protect it from moisture, sharp tempera-
ture drops and shocks.
• Be careful not to touch the glass surfaces. If you put finger-
prints on, or contaminate the glass surfaces, use only clean
and soft materials to clean it.
• Protect the unit from excessive lighting. Do not turn the
sight on in daylight with the Front Lens Cap off. Do not point
the sight at the bright light source (a fire, car headlights,
lanterns, street lamps, room lights, etc.).
• Do not test the device in daylight conditions even with the
daylight filter/lens cap on for more than ten (10) minutes.
• Do not leave the unit in on position during stops in
operation.
• Remove the battery from the unit when storing for periods
exceeding 3 days. Failure to do so may damage unit.
This producT conTains naTural rubber laTex which
may cause allergic reacTions.
CAU T I O N :
a

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ps-40 mgc

Table of Contents