Freestyle Bella FS80982 Instruction Manual

BELLA
Model FS80982
Model FS80983
Model FS80984
FEATURES:
• 100 meters H2O
• Day/date
• EL backlight
• 10 lap memory chronograph
• Countdown timer
• Alarm
• Dual time
CONTROL BUTTONS
S1 – Start/lap Button
S2 – Stop/reset Button
S3 – Mode Button
S4 – Light Button
S4
S3
DISPLAY MODES
The watch has five display modes:
NORMAL TIME (TIME),
CHRONOGRAPH (Chro), RECALL
(RCL), ALARM (AL) and TIMER (TMR).
The change from one display mode to
another, press S3 button once.
TO SET THE TIME AND
CALENDAR
1. Press S3 button to select NORMAL
TIME mode.
2. Press S1 button to toggle between
NORMAL TIME mode and TIME 2
mode to set.
3. Press and hold S2 button for around
2 seconds, the second digits will
blink.
4. Press S1 button to reset the second
digits to 00.
5. Press S3 button once, the hour
digits will blink.
6. Press S1 to set the hour digits.
Holding down the button will speed
up the process.
7. Press S3 button once, the minute
digits will blink.
8. Press S1 button to set the minutes
digits.
9. Follow the same pattern to set the
TRIM
day (of the week), year, month, date Press S1 button to resume from
and hour format. where if left off.
10.To set the hour format, press S1 6. To reset to zero, press S2 button to
button to toggle between 12-hour stop counting, then press S2 button
and 24-hour format. The P.M. again to reset the counter to zero.
indicator may be displayed to
indicate the time period 12:00 A.M. TO USE THE RECALL FUNCTION
– 11:59 P.M. in 12-hour format.
1. Press S3 button to select RECALL
11.After finish making all the settings,
mode. The lap record of the previous
press S2 button to confirm.
chronograph counting will be
displayed.
NOTE: The chosen hour format will
2. Press S1 button to cycle the first
apply to both NORMAL TIME mode and
nine to the last split/lap record.
TIME 2 mode.
3. Press S2 button to return to
CHRONOGRAPH mode.
NOTE: In TIME 2 settings, only hours,
minutes, day, year, month and date
NOTE: The lap record will be cleared
are open to setting.
when chronograph is reset.
TO SET THE ALARM TIME
TO USE THE CHRONOGRAPH
1. Press S3 button to select ALARM
(STOP WATCH)
mode.
1. Press S3 button to select 2. Press S2 button toggle between
CHRONOGRAPH mode. HOME ALARM (HOME) and TIME 2
2. The chronograph will then be ALARM (T2) to set.
displayed in its current state – reset, 3. Press and hold S2 button for around
running, or stopped. 2 seconds, the hour digits will blink.
3. To resume a counting, press S1 4. Press S1 button to set the hour
button to resume from where it left digits. Holding down the button will
off. speed up the process.
4. To start a new counting, reset the 5. Press S3 button once, the minute
chronograph to zero first. digits will blink.
Press S1 button to stop counting, 6. Press S1 button to set the minute
then press S2 button to reset digits.
counter to zero. 7. After finishing making all the
S1
settings, press S2 button to confirm.
For changing the chronograph display
format: NOTE: The alarm will automatically
In CHRONOGRAPH mode, be activated after being set.
1. Press S2 button to toggle between
S2
SPLIT format and LAP format. TO TURN ON/OFF THE ALARM
2. If SPLIT format is selected, the split
AND HOURLY CHIME
time (cumulative lap time) will be
In ALARM mode,
displayed.
1. Press S2 button toggle between
If LAP format is selected, the lap
HOME ALARM and TIME 2 ALARM
time (individual lap time) will be
to set.
displayed.
2. Press S1 button once to activate the
hourly chime. Chime indicator
For the measurement of elapsed time:
will appear.
In CHRONOGRAPH mode,
3. Press again to activate the alarm.
1. Press S1 button to start counting.
Alarm indicator
2. To stop counting, press S2 button.
4. Press the third time to activate both
Press S1 button to resume from
functions. Both of the indicators will
where if left off.
appear.
3. To reset to zero, press S2 button to
5. Press the fourth time to deactivate
stop counting, then press S2 button
both functions. Both of the
again to reset the counter to zero.
indicators will disappear.
For the measurement of split time:
WHEN AN ALARM OR HOURLY
In CHRONOGRAPH mode,
CHIME GOES OFF
1. Press S1 button to start counting.
A beep will be emitted by the hour if
2. While the chronograph is running,
the hourly chime is activated.
press S1 button once to register a
lap.
An 20-second alarm tune will be
3. Depends on the chronograph
emitted at the designated time when
display format selected, the
the alarm is activated. To stop the tune,
cumulative lap time (if SPLIT format
press any button.
is selected) or the individual lap
time of the previous lap (if LAP
TO SET THE TIMER
format is selected) will be displayed.
1. Press S3 button to select TIMER
After around 5 seconds, the
mode.
currently accumulated time will be
2. Press and hold S2 button for around
displayed.
2 seconds, the hour digits will blink.
4. Repeat the last step until all the
3. Press S1 button to set the hour
laps have been registered.
digits. Holding down the button will
5. To stop counting, press S2 button.
speed up the process.
4. Press S3 button, the minute digits
FOLLOW THESE 8 TIPS TO GET THE
will blink.
5. Press S1 button to set the minute
MOST OUT OF YOUR NEW WATCH!
digits.
6. Press S3 button, the second digits
will blink.
7. Press S1 button to set the second
1. Never pull out the crown or operate
digits.
the pushers/buttons under water.
8. After finish making all the settings,
press S2 button to confirm. 2. Make sure your crown is returned
to the original position before you
TO USE THE TIMER
expose your watch to water.
In TIMER mode,
1. Press S1 button to start counting. 3. If your watch is exposed to
2. To stop counting, press S2 button.
saltwater it is very important to
Press S1 button to resume from
wash it thoroughly under tap water
where it left off.
and wipe dry with a soft cloth.
3. To reload the timer, press S2 button
Keep it clean!
to stop counting, and then press S2
button again.
4. Severe impacts or drops may
4. After reaching zero in a countdown,
affect your watches water
a tune will be emitted. To stop the
resistance and performance.
tune, press any button.
5. Avoid exposing your Freestyle
TO USE THE BACKLIGHT
watch to extreme temperatures
Press S4 button to turn on the
such as in a hot shower, Jacuzzi,
backlight for 3-5 seconds.
sauna or hot tub. The combination
OTHERS of extreme heat and water may
In any setting procedure, if there is no cause your watch to lose some of
key manipulation for around 1-2
its water resistance.
minutes, the watch will automatically
6. Avoid exposing your watch to
save the entered data and exit the
setting procedure.
chemicals, soaps or solvents as
they deteriorate the water resist
seals in your watch.
7. Never try to remove the caseback,
leave this to a certified watch repair
technician or Freestyle service
center. This will help in preventing
water leakage from improper
battery replacement.
8. It is advisable to have your watch
pressure tested annually and to
re-furbish your watch every 2-3
years to extend the life of the watch.
will appear.
LIMITED LIFETIME WARRANTY
Freestyle U.S.A. warrants, to the
original purchaser, that its watches
are free from defects in materials
and workmanship for the lifetime
of the watch (under normal use)
from date of original purchase.
The following are not covered under
warranty: battery, strap/bracelet/
band and crystal.
Accidental breakage or damage
due to normal wear or misuse of
the product, including but not limited
to the mathematical accuracy of
the product, is not covered under
this warranty. Some states do not
allow limitations on how long an
implied warranty lasts, or the
exclusions of or limitations on
consequential damages, so the
above limitation may not apply to
you. This warranty gives you
specific legal rights, and you may
have other rights, which vary from
state to state.
Under this warranty FREESTYLE
will make any necessary repairs, if
applicable, at no cost to you the
consumer. Any repair needed that
is not under warranty will be at the
cost of you the consumer. Proof
of purchase and / or original receipt
it needed to validate your warranty.
Your warranty is voided by any
servicing out by a non-authorized
agent. Any other form of guarantee
to you by the retailer is his / her
responsibility. This warranty applies
to watches purchased in the United
States. For watches purchased
outside the United States, please
contact you authorized
FREESTYLE dealer for warranty
information.