Freestyle Groms FS80968 How To Use

GROMINATOR
Model FS80966
Model FS80967
Model FS80968
FEATURES:
• CURRENT TIME
• DAY/MONTH/DATE
• DAILY ALARM
• HOURLY CHIME
• STOPWATCH
• COUNTDOWN TIMER
• DUAL TIME
• DUAL ALARM
• 100 Meters H2O
• NIGHT VISION™
BACK LIGHT
KEY TO SYMBOLS
LIGHT
S3
INTRODUCTION
Congratulations on your purchase of
the Grominator. Designed for easy
operation, the watch automatically
tells you which button to use in a
setting procedure. The watch has
the following functions:
• Real-time calendar clock for home
time
• Second calendar clock for foreign
time
• Dual daily alarms and hourly
chimes
• Stopwatch with split function
• 10 preset countdown timers
The watch is also equipped with an
EL back light to facilitate time
reading at night or in dim light.
HOW TO USE THE BACK LIGHT
Press the LIGHT button once to turn
on the back light for three seconds.
TRIM
DISPLAY MODES 2 Select home and foreign time
alarm using the S2 button.
The watch has four display modes:
3 Hold the S2 button for two
home time (TIME), home time alarm
seconds. The SET message will
(ALM1), stopwatch (STW) and appear. The minute digits will
countdown timer (TMR).
blink.
4 Use the S1 button to set the
To change from one display mode to
minutes.
another, press the S3 button once.
The mode description will appear for 5 Press the S3 button. The hour
digits will blink.
two seconds before activating the
6 Use the S1 button to set the
selected mode.
hours.
7 Press the S2 button to confirm
HOME AND FOREIGN DISPLAY and exit.
8 In setting mode, if there is no
To display the foreign time, press S2
manipulation for about 100
when the home time is displayed. seconds, the display will
The mode description (TM-2) will
automatically return to home /
appear shortly before the foreign
foreign time alarm display
time is displayed. To change back to (subject to the alarm time being
the home time, press S2.
selected for setting).
To display the daily alarm for foreign
time, press S2 when the daily alarm
for home time is displayed. The
HOW TO USE THE DAILY
mode description (ALM 2) will
ALARMS AND CHIMES
appear shortly before the foreign
time alarm is displayed.
To display the alarm time, select
ALM 1 or ALM 2 mode using the S2
button in alarm mode.
HOW TO SET THE TIME AND
Use the S1 button to set the status
DATE
of the alarm and chime functions of
the chosen alarm. Press the button
1 Select time display using the S3
once to activate the daily alarm.
button.
Press the button again to activate
2 Select home time or foreign time
the hourly chime. Press the button a
using the S2 button.
third time to activate both functions.
3 Hold the S2 button for two
To deactivate both, press the S1
seconds. The SET message will
button a fourth time.
appear momentarily. The second
The chime and alarm indicators will
digits will blink.
appear when their respective
4 Press the S1 button to reset the
S1
functions are active.
second digits to 00.
5 Press the S3 button. The minute
digits will blink.
WHEN AN ALARM OR HOURLY
6 Use the S1 button to set the
S2 CHIME GOES OFF
minutes. Press the button once
to increase the digits by one unit
A tune will go off by the hour if the
or speed up the process by
hourly chime function is activated
holding down the button.
and a 20-second alarm tune will be
7 Press the S3 button.The hour
emitted at the designated time when
digits will blink.
the alarm is active. To stop either
8 Use the S1 button to set the
tune, press any button.
hours.
To disable the functions, select ALM
9 Follow the same pattern to set
1 or ALM 2 and use S1 button to turn
the day-of-the-month, month,
off the indicator of the function as
day-of-the-week, hour format
desired.
and date format. For the hour
format,you can choose 12-hour
display with P indicator or 24-
HOW TO USE THE STOPWATCH
hour display. As for the date
format, you can choose M-D
For a straight forward count-up,
(month-day) or D-M (day-month).
1 Select stopwatch mode using the
The chosen formats will apply to
S3 button. The last recorded time
both home and foreign settings.
of the stopwatch will be displayed.
10 Press the S2 button to confirm
Press the S2 button to clear the
the settings and return to
old record.
current time display.
2 Press the S1 button once to start
11 In setting mode, if there is no
the stopwatch. The watch will
manipulation for about 120
start counting from 00'00''00 if
seconds, the display will
the watch is cleared. Otherwise, it
automatically return to current
will pick up from where it last left
time display.
off. The watch will count up to 59
minutes and 59.99 seconds before
starting from zero again.
HOW TO SET THE DAILY
3 To stop counting, press the S1
ALARMS
button once. Press the button
again to resume from where it left
1 Select alarm function using the
off. To clear the stopwatch, press
S3 button.
the S1 button to stop counting and
then press the S2 button.
FOLLOW THESE 8 TIPS TO GET THE
The stopwatch is equipped with a
split function for you to keep track of
MOST OUT OF YOUR NEW WATCH!
individual lap time. To use the
function,
1 While the stopwatch is running,
press the S2 button once 1. Never Pull out the crown or operate
whenever you want to register a
the pushers/buttons under water.
lap.
The stopwatch is still running in 2. Make sure your crown is returned
the background. To display the to the original position before you
currently accumulated time,
expose your watch to water.
press the S2 button.
2 Repeat the last step until you 3. If your watch is exposed to
have registered all the laps.
saltwater it is very important to
3 Press S1 to stop counting. Press
wash it thoroughly under tap water
the button again to resume or
and wipe dry with a soft cloth.
press the S2 button to clear.
Keep it clean!
Note: You can leave the stopwatch
running while switching over to
4. Sever impacts or drops may affect
other operating modes. The STW
your watches water resistance
indicator will light up as a reminder.
and performance.
5. Avoid exposing your Freestyle
HOW TO USE THE TIMER
watch to extreme temperatures
To set the count down time,
such as in a hot shower, Jacuzzi,
1 Select timer mode using the S3
sauna or hot tub. The combination
button. The last selected timer
of extreme heat and water may
setting will be displayed.
cause your watch to lose some of
2 Use the S2 button to alter the
setting. You can select among 1, its water resistance.
3, 5, 10, 15, 20, 25, 30, 45 and 60
6. Avoid exposing your watch to
minutes.
chemicals, soaps or solvents as
To start a countdown, press the S1
button. Press the button again to they deteriorate the water resist
stop the countdown or a third time to
seals in your watch.
resume from where it left off.
7. Never try to remove the caseback,
After reaching zero on a countdown,
a 20-second beep will go off. To stop
leave this to a certified watch repair
the beeping, press any button. The
technician or Freestyle service
timer will reload automatically.
center. This will help in preventing
water leakage from improper
BATTERY INFORMATION battery replacement.
8. It is advisable to have your watch
The watch uses a 3.0V lithium
button cell battery, which in normal pressure tested annually and to
circumstances will be good for 1-2
re-furbish your watch every 2-3
years. However, the battery life will
years to extend the life of the watch.
vary due to shelf time and the
manner the watch is used.
LIMITED LIFETIME WARRANTY
Freestyle U.S.A. warrants, to the
original purchaser, that its watches
are free from defects in materials
and workmanship for the lifetime
of the watch (under normal use)
from date of original purchase.
The following are not covered under
warranty: battery, strap/bracelet/
band and crystal.
Accidental breakage or damage
due to normal wear or misuse of
the product, including but not limited
to the mathematical accuracy of
the product, is not covered under
this warranty. Some states do not
allow limitations on how long an
implied warranty lasts, or the
exclusions of or limitations on
consequential damages, so the
above limitation may not apply to
you. This warranty gives you
specific legal rights, and you may
have other rights, which vary from
state to state.
Under this warranty FREESTYLE
will make any necessary repairs, if
applicable, at no cost to you the
consumer. Any repair needed that
is not under warranty will be at the
cost of you the consumer. Proof
of purchase and / or original receipt
it needed to validate your warranty.
Your warranty is voided by any
servicing out by a non-authorized
agent. Any other form of guarantee
to you by the retailer is his / her
responsibility. This warranty applies
to watches purchased in the United
States. For watches purchased
outside the United States, please
contact you authorized
FREESTYLE dealer for warranty
information.