Table of Contents
Advertisement
This chapter contains information to help you solve problems. If Giga Switch is not
functioning properly, make sure the Ethernet Switch was set up according to instructions
in this manual.
The Link LED is not lit
Solution:
Check the cable connection and its quality.
Some stations cannot talk to other stations located on the other port
Solution:
The address table may contain older information than of the address table of
that node. Please power down to refresh the address information.
Performance is bad
Solution:
Check the full duplex status of the partner Switch. The Gigabit Ethernet Switch
is run at full duplex and the partner is set to half duplex, then the performance
will be poor.
Chapter 4
TROUBLESHOOTING
11
Advertisement
Table of Contents
