Planet FNSW-2402S User Manual page 10

Figure 2-3 Attaching the brackets to the FNSW-2402S
Caution:
You must use the screws supplied with the mounting brackets. Damage
caused to the parts by using incorrect screws would invalidate your war-
ranty.
Step 3: Secure the brackets tightly.
Step 4: Follow the same steps to attach the second bracket to the opposite side.
Step 5: After the brackets are attached to the switch, use suitable screws to se
curely attach the brackets to the rack, as shown in Figure 2-4
Step 6: Proceed with the steps 4 and steps 5 of section 2.2.1 Desktop Installation
to connect the network cabling and supply power to your switch.
8
Figure 2-4 Mounting the Switch in a Rack