Pioneer AVH-P5950DVD Operation Manual page 39

Operating this unit
Display Equalizer curve
POWERFUL
Powerful
NATURAL Natural
VOCAL
Vocal
CUSTOM1 Custom 1
CUSTOM2
Custom 2
FLAT Flat
SUPER BASS Super bass
! CUSTOM1 and CUSTOM2 are adjusted
equalizer curves that you create. Adjust-
ments can be made with a 7-band graphic
equalizer.
! When FLAT is selected no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
FLAT and a set equalizer curve.
% On the normal display, touch EQ to se-
lect the equalizer.
Touch EQ repeatedly to switch between the fol-
lowing equalizers:
POWERFUL—NATURAL—VOCAL—
CUSTOM1—CUSTOM2—FLAT—
SUPER BASS
Adjusting equalizer curves
The factory supplied equalizer curves, with the
exception of FLAT, can be adjusted to a fine
degree (nuance control).
1 Touch GRAPHIC EQ on the audio func-
tion menu.
2 Touch c or d to select an equalizer
curve.
POWERFUL—NATURAL—VOCAL—
CUSTOM1—CUSTOM2—FLAT—
SUPER BASS
3 Touch c or d to adjust the equalizer
curve.
+6 to –4 (or –6) is displayed as the equalizer
curve is increased or decreased.
# The actual range of the adjustments are differ-
ent depending on which equalizer curve is se-
lected.
# The equalizer curve with all frequencies set to
0 cannot be adjusted.
Adjusting 7-band graphic equalizer
For CUSTOM1 and CUSTOM2 equalizer
curves, you can adjust the level of each band.
! A separate CUSTOM1 curve can be cre-
ated for each source. If you make adjust-
ments when a curve other than CUSTOM2
is selected, the equalizer curve settings will
be memorized in CUSTOM1.
! A CUSTOM2 curve can be created com-
mon to all sources. If you make adjust-
ments when the CUSTOM2 curve is
selected, the CUSTOM2 curve will be up-
dated.
1 Touch GRAPHIC EQ on the audio func-
tion menu.
2 Touch c or d to select an equalizer
curve.
POWERFUL—NATURAL—VOCAL—
CUSTOM1—CUSTOM2—FLAT—
SUPER BASS
3 Touch c or d to select the equalizer
band to adjust.
50Hz—125Hz—315Hz—800Hz—2kHz—
5kHz—12.5kHz
4 Touch a or b to adjust the level of the
equalizer band.
+12dB to -12dB is displayed as the level is in-
creased or decreased.
# You can then select another band and adjust
the level.
Section
03
39
En