Download Print this page

Selecting A Recording Mode - Philips LX9000R Quick Use Manual

Hide thumbs Also See for LX9000R:

Advertisement

Quick use guide

Selecting a recording mode

Before recording, press REC MODE repeatedly to select
the desired recording mode:
mode
quality
HQ
better than DVD
SP
DVD
SP+
better than S-VHS
LP
S-VHS
EP
better than VHS
EP+
VHS
Recording a TV programme with
safe record
1
Switch your TV set on. If necessary set the TV to the
correct audio/video channel for the DVD recorder system.
Such channels may be called AUX or AUXILIARY IN,
AUDIO/VIDEO or A/V IN, EXT1, EXT2 or EXTERNAL IN,
etc.These channels are often near channel 00.
2
Load a DVD+R disc or DVD+RW disc on which you want
to record in the tray.
3
Press DVD/MON on the remote control as often as
necessary to see the currently selected TV channel.
4
Press CH+ or CH- on the remote control as often as
necessary to select the desired TV channel (programme
number) from which you wish to record.
5
Keep REC/OTR on the remote control pressed until
SAFE RECO is displayed.
Press STOP 9 to stop recording.
6
recording time
60 minutes
120 minutes
150 minutes
180 minutes
240 minutes
360 minutes
3103 306 1930.1
Recording from other appliances
1
Switch your TV set on. If necessary set the TV to the
correct audio/video channel for the DVD recorder system.
Such channels may be called AUX or AUXILIARY IN,
AUDIO/VIDEO or A/V IN, EXT1, EXT2 or EXTERNAL IN,
etc.These channels are often near channel 00.
2
Load a disc on which you want to record in the tray.
3
Press on the remote control either:
SAT: to record from a connected satellite receiver.
CAM1/2: to record from a connected video camera. Press
the button repeatedly to toggle between camera 1
(analogue input) and camera 2 (digital i.Link input).
VCR/GAME: to record from a connected video cassette
recorder or a game console. Press the button repeatedly to
toggle between video cassette recorder and game console.
4
Press RECORD on the DVD recorder system or REC/OTR
on the remote control to start recording.
Note: Recordings on a DVD+RW disc are started from the
current position. From there on, earlier recordings may be
overwritten without notice, unless the disc is write protected.
To interrupt recording press PLAY/PAUSEÉ Å.
0 0
To resume recording press PLAY/PAUSEÉ Å again.
0 0
Press STOP 9 to stop recording.
5
LX9000R
VieChr0316

Advertisement

loading