Setting Up Wi-Fi Connection Between Center And Station; Mounting The Wifi Antenna Onto Center; Mounting The Stand Onto Station - Philips WACS4500 User Manual

IMPORTANT!
– Before you decide where and how to
place both the Center and Station, try
the Wi-Fi connection and rear
connections to find a suitable location.
3.1 Setting up Wi-Fi connection
between Center and Station
Wi-Fi connection starts automatically when you
power up both the WAC4500 Center and
WAS4500 Station
1
The first time you set up a Wi-Fi connection,
place the Center and Station side by side on a
flat and firm surface.
2
a. Connect the Center to power supply
b. Connect the Station to power supply
➜
Auto installation/connection starts
➜
HD screen appears on the Center
➜
HD screen appears on the Station when the
Station is connected to the Center
3
Unplug the Center and Station. Relocate as
desired.
IMPORTANT!
– Make sure that you have already
powered up the Center before powering
up the Station.
– Avoid installing between thick walls.
The Center and Station should never be
blocked by 2 or more walls.
– Avoid placing the system near to large
metal objects.
– For better Wi-Fi reception, turn the
Wi-Fi antenna, or adjust the location of
the Center and Station.
– Always press and hold STANDBY-ON 2
to switch the set to ECO POWER
(power-saving mode) before removing its
power plug.
3. Installation
WARNING:
- Never make or change connections with
the power supply switched on.
– Install your Center and Station near the
AC outlet and where the AC power plug can
be reached easily.
3.2 Mounting the Wi-Fi antenna
onto Center
1
As shown, insert the L-shaped antenna into the
socket WiFi ANTENNA
2
Press and screw the antenna clockwise till it is
secured in place.
3.3 Mounting the stand onto
Station
1
Align the stand's slots as shown
2
Push down the stand till it is locks into place
Helpful hints:
– Once mounted, the stand is undetachable.
17