Advertisement
Table of Contents
Section
1.0 Warranty Information .............................................................2
2.0 General Information...............................................................4
3.0 Installation .............................................................................5
Appendix A - Specifications..........................................................7
Appendix B - Pin Out Configuration .............................................8
Page
1
1.0 Warranty Information
Patton Electronics warrants all Model 1104 components to be free
from defects, and will-at our option-repair or replace the product should
it fail within one year from the first date of shipment.
This warranty is limited to defects in workmanship or materials,
and does not cover customer damage, abuse or unauthorized modifi-
cation. If this product fails or does not perform as warranted, your sole
recourse shall be repair or replacement as described above. Under no
condition shall Patton Electronics be liable for any damages incurred
by the use of this product. These damages include, but are not limited
to, the following: lost profits, lost savings and incidental or consequen-
tial damages arising from the use of or inability to use this product.
Patton Electronics specifically disclaims all other warranties,
expressed or implied, and the installation or use of this product shall
be deemed an acceptance of these terms by the user.
1.1 Radio and TV Interference
The Model 1104 generates and uses radio frequency energy, and if not
installed and used properly-that is, in strict accordance with the man-
ufacturer's instructions-may cause interference to radio and television
reception. The Model 1104 has been tested and found to comply with
the limits for a Class A computing device in accordance with the speci-
fications in Subpart J of Part 15 of FCC rules, which are designed to
provide reasonable protection from such interference in a commercial
installation. However, there is no guarantee that interference will not
occur in a particular installation. If the Model 1104 does cause interfer-
ence to radio or television reception, which can be determined by dis-
connecting the unit, the user is encouraged to try to correct the inter-
ference by one or more of the following measures: moving the com-
puting equipment away from the receiver, re-orienting the receiving
antenna and/or plugging the receiving equipment into a different AC
outlet (such that the computing equipment and receiver are on different
branches).
1.2 CE Notice
The CE symbol on your Patton Electronics equipment indicates
that it is in compliance with the Electromagnetic Compatibility (EMC)
directive and the Low Voltage Directive (LVD) of the European Union
(EU). A Certificate of Compliance is available by contacting Technical
Support.
2
Advertisement
