Panasonic KX-T123211D Programming Manual page 94

When enter Disposal Execute Command, the ways are done as
follows.
Main Command = M
S u b c o m m a n d = S
= Pl
Parameter n = Pn are explained as this.
q
Alphabet of Main Command can be entered with large and small
character.
n
The punctuation of Command and Parameter is done with "/".
q
The maximum character number enable to enter with one
Command are 78 digits and if exceed the number it'll come to be
Data error.
n
Comment Sentence
If the first line is started with " ; ", Lines after that will be regarded
as Comment Sentence.
n
does not affect an operation.
Supplement
Subcommand, there is no Subcommand and edit or show at a
time.
@Edit Mode (No Subcommand):
@Show Mode (Subcommand):
@Show Mode (No Subcommand):
To set the default of Parameter, press " A " key.
Example;
Also, In case All parameter with Command is set as default
MS * 1 (To default all parameter with Subcommand S of Main
Command)
Example;
M * A 1 (To default all parameter with all Subcommand of Main
Command)
Example;
M A 1 (To default all parameter with Main Command M)
Example;
n Sequence Enter of parameter (Edit Mode)
The order of entering parameter is decided by Main Cornmar+
and you must obey the entering format.
l r - 3
M t /Pl /P2/. ./Pn/l
M I Pi I P2 I. . . I Pn I 1
M 1
Jack number 01 is set to Extension setting
Command "01 S" as default value.
1
To default the Starting Time of Day/Night Service
Mode on Monday, press 13Sl A 1.
To default the Starting Time of Day/Night Service
Mode on Sunday through Saturday, press
1 3 s * Al.
To default the Parity, Carriage Return for a New
Line, Word Length, Stop Bit Length and Baud
Rate, press 90s h 1 .