Panasonic KX-T123211D Programming Manual page 2

reprogramming (Showing, Editing, Dumping so on) can be done by
using a RS-232C interface port or a MODEM (through a Central
Off ice) from the place where KX-Tl23211 D is set and far.
n
When use the RS-232C interface port (On-site Administration)
Programming or reprogramming can be done by connecting it to
KX-T123211 D at the same place as it.
Data terminal equipment
n
When use the MODEM (Remote Administration)
Programming or reprogramming can be done through a Central
Office from the place where KX-Tl23211 D is in a few handreds
miles away.
Data terminal equipment
Preface
Telepone Line
KX-T1232 11 D
n
The Card which should be installed to KX-Tl23211 D consists of
the following cards.
n
If Outgoing Message is sent when a call is sent to KX-Tl23211 D,
you will be able to confirm that the call arrived to the other party,
so this card is useful.
n
Data terminal equipment
We recommend a data terminal equipment provided with a display
(Example KX-D4985 Panasonic).
A data terminal which is not equipped with a display can print out a
data automatically, so this can be used, too.