Panasonic KX-T123211D Programming Manual page 17

1. Set a floppy disk to the drive of a data terminal equipment.
2. UTo chanqe or proqram a data
parameter corresponding to the feature that you want to
change as the way on page 3-9 "Editing or Programming".
corresponding to the feature that you want to confirm as the
way on page 3-12 "Showing".
3. Make the floppy memorize the entered data.
Example :
q
Change or program _
Make the data to edit as follows and memorize the data to the
floppy disk.
number 01 into 190.
Enter them to the data terminal equipment as below
EOD 1
Note
one data.
1