Using The Answering System Remotely - Panasonic KX-TG1851NZ Operating Instructions Manual

Answering System Features
be entered each time you operate the
answering system remotely.
Turning remote operation on
A 3-digit remote access code must be
entered when operating the answering
system remotely. This code prevents
unauthorised parties from listening to
your messages remotely.
{j/OK}
1
{^}/{V}: "Answer System" i
2
{>}
{^}/{V}: "Settings" i {>}
3
{^}/{V}: "Remote Code" i {>}
4
5
To turn on remote operation, enter a
3-digit remote access code.
L To turn off remote operation,
press {*}.
{j/OK} i {ih}
6
Using the answering system
remotely
1
Dial your phone number from a
touch-tone phone.
2
After the greeting message starts,
enter your remote access code.
L The unit will announce the
number of new messages.
L After 3 seconds, voice guidance
starts.
3
Follow the voice guidance prompts
as necessary.
Note:
L You can hang up at any time.
Voice guidance
During remote operation, the unit's voice
guidance will prompt you to press {1} to
perform a specific operation, or press
{2} to listen to more available
operations.
28
Remote commands
You can press dial keys to access
certain answering system functions
without waiting for the voice guidance to
prompt you.
Key Operation
{1}
Repeat message (during
playback)
{2}
Skip message (during
playback)
{4}
Play new messages
{5}
Play all messages
{6}
Play greeting message
{7}
Record greeting
message
{9}
Stop (recording,
playback)
{0}
Turn answering system
off
{*}{4}
Erase currently playing
message
{*}{5}
Erase all messages
{*}{6}
Erase greeting message
(during greeting message
playback)
{*}{#}
End remote operation (or
hang up)
*1 If pressed within the first 5
seconds of a message, the
previous message will be played.
Turning on the answering
system remotely
If the answering system is off, you can
turn it on remotely.
1
Dial your phone number from a
touch-tone phone.
2
Let the phone ring 15 times.
L A long beep will be heard.
*1