Connections - Panasonic KX-TG1851NZ Operating Instructions Manual

Preparation

Connections

Connect the telephone line cord until it
clicks into the base unit and telephone
line jack (A). Connect the AC adaptor
cord (B) by pressing the plug firmly (C).
Base unit
C
C
A
B
USE ONLY the
supplied AC adaptor.
(220–240 V, 50/60 Hz)
To telephone line
USE ONLY the supplied
cord.
Important:
L If you use a telephone line cord which
is not supplied, the unit may not work
properly.
10
Charger (KX-TG1852/KX-TG1853)
Hook
Note:
L Never install telephone wiring during a
L The AC adaptor must remain
L The AC adaptor should be connected
L The unit will not work during a power
L The unit is not designed to be used
L The unit's answering system will not
If you subscribe to an ADSL service
L Please attach a noise filter (contact
B
(220–240 V, 50/60 Hz)
USE ONLY the supplied
AC adaptor (smaller).
lightning storm.
connected at all times. (It is normal for
the adaptor to feel warm during use.)
to a vertically oriented or floor-
mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor
may cause it to become disconnected.
failure. We recommend connecting a
standard telephone to the same
telephone line or to the same
telephone jack using a BT double
adaptor.
with rotary (pulse dialling) services.
answer incoming calls on your
FaxAbility number.
your ADSL service provider) to the
C
C
Hooks