Table of Contents
Advertisement
Component system configuration
Outline of peripheral components
Camera Control Unit (CCU: AK-HCU931)
This is the Multi-Format Camera's camera control unit.
It is connected to the Multi-Format Camera using an
optical fiber cable.
HD/SD video input and output can be supported by
inserting the HD/SD output unit.
Remote Operation Panel (ROP: AK-HRP931)
The ROP is connected to the CCU using the ROP cable,
and enables the camera, CCU and lens to be operated by
remote control.
Master Setup Unit (MSU: AK-MSU935)
When a multiple number of cameras and CCUs are used,
the MSU can operate up to 12 units either separately or
simultaneously by remote control.
It can be operated together with the ROP.
2˝ Electronic HD Viewfinder (2˝ VF: AJ-HVF21)
This is the viewfinder for the Multi-Format Camera.
8˝ LCD Viewfinder (8˝ LCD VF: AK-HVF931A)
This is the LCD viewfinder for the Multi-Format Camera.
It can be used at the same time as the 2˝ viewfinder.
It can still be operated when the system is built up.
Buildup Unit (AK-HBU3500)
A large-sized lens can be mounted on the multi-format
camera to enable the same operations as for a
large-sized camera can be undertaken.
Component connections
Refer to pages 20 to 22 for the component connections.
After all the components have been connected (the monitor
system may be connected afterward), set the CCU's main
power switch to the ON position.
Then turn on the camera's power switch.
19
Advertisement
Table of Contents
