Table of Contents
Advertisement
10. CLIPCOPY TOOLBAR
The ClipCopy toolbar consists of the News Automation Mode for selecting the News
Automation usage format as well as the [Copy] and [Paste] buttons for copying and pasting
files and clips as shown in Fig.10-1.
10.1 News Automation Mode
This is for selecting the News Automation usage format. The News Automation mode is
operational only when the News Automation mode is used (that is to say, when the Enable
NewsAutomation option has been checked). The Normal mode is the default setting as
shown in Fig.10-2.
[Normal mode]
[Register Only mode]
10.2 Other
[Copy] button
This function in the same way as the [Copy] menu item on the [Edit] menu.
[Paste] button
This functions in the same way as the [Paste] menu item on the [Edit] menu.
Note17:This is the list of the video data which is scheduled to go on the air and which is controlled by the automation
Fig. 10-1
Fig. 10-2
In this mode, the names of the clips are captured from the run-down list (See Note 17
below.), and News Automation system operates normally to register the clips under
these names in the automation server.
In this mode, the run-down list is not referenced, and the News Automation system
operates solely to register the clips under their current names in the automation serv-
er.
server. The News Automation system uses the names of the video data on the run-down list in order to
exercise centralized control over the video data.
Fig. 10-3
Fig. 10-4
34
Advertisement
Table of Contents
