Starting Up Clipcopy - Panasonic AJ-SF771AP Reference Manual

Clipcopy application ver. 2.5

Table of Contents

4. STARTING UP CLIPCOPY

The ClipCopy application operates in tandem with the newsBYTE /QuickCutter application.

This means that the newsBYTE/QuickCutter application must be launched before the

ClipCopy application is launched. This section describes how the ClipCopy application is

started by the following steps.

1. Start the newsBYTE/QuickCutter application by following the instructions in the

newsBYTE/QuickCutter application manual.

2. The newsBYTE/QuickCutter application window shown in Fig. 4-1 will now appear.

Double click on the Special button located in the Toolbox.

Fig. 4-1

Table of Contents