Panasonic KX-TD208 Getting Started Manual page 5

P O W E R
ISDN line cord to "ISDN Port 1" and the Telephone socket to the exchange line.
To the Exchange Line
supplied extension line cord to the "Extension Jack" and telephone equipment.
2.
Insert the user-supplied telephone
wires completely into the holes of
the included plugs.
5.
hole
Insert the other end of the wires
into the hole on the back and
tighten both screws by the driver.
the RS-232C port.
data using TD208.EXE file in the included floppy disk on the IBM-PC/AT or compatible personal computer (PC).
OS) is Version 5.0 or later versions of MS-DOS.
and connect the AC cord to the AC inlet and AC outlet.
AC Inlet
P O W E R
1
2
screw
A
B
A 5
B 2
1
6
2
5
3
4
EXTN.
8
EXTN.
7
EXTN.
6
EXTN.
5
1
EXTN.
. Slide the cover in the direction of the arrow.
4
EXTN.
3
EXTN.
2
EXTN.
1
2
. Tighten the screw.
screw
. Loosen the screw.
. Slide the cover toward the right
while pressing the " " mark.
3.
Press the transparent part into the
black part firmly.
Note
¥For installing proprietary telephones,
an optional PT Interface Card
(KX-TD20870CE) should
be installed on your system.
Please refer to the Operating
Instructions for details.
• • • 5 • • •
A
B
¥The maximum length of the
extension line cords
to the extensions are;
Line Diameter Max. Length
0.6mm
SLT
0.6mm
PT
620m
240m