@ INTERCOM
Button and
Indicator:
Used for making or receiving
an intercom call.
@CONFERENCE
Button and
Indicator:
Used for speaking with three
parties at the same time.
@ REDIAL Button:
Redials the last number
dialed.
@ FLASH Button:
Used for sending the hook
flash signal to the CO line.
@ LCD (Liquid Crystal Display)
@ Programmable
Feature Buttons:
Dials or accesses the system
feature with one touch.
@ Flexible CO Line Buttons and
Indicators*:
Used for dialing via CO line,
Direct Station Selection, or
Programmable
Feature
buttons.
@ Flexible Message Waiting
Button and Indicator*:
Used for Message Waiting,
Direct Station Selection, or
Programmable
Feature button.
@ FWD/DND Button and Indicator:
Sets or cancels the Call
Forwarding/Do
Not Disturb
feature.
@TRANSFER
Button:
Transfers a call to any
extension.
0 PAUSE Button:
Inserts a pause between the
access number and the
phone number.
@I AUTO DIAL/STORE
Button
and Indicator:
Used for dialing the system
speed dialing/For storing
functions into memory.
@AUTO
ANSWER/MUTE
Button
and Indicator:
Used for answering an
intercom call automatically/
For muting your voice in
hands-free
mode.
@I SP-PHONE Button and
Indicator:
Used for making or receiving
a call without using the
handset.
@ HOLD Button:
Places a call on hold.
*These functions are limited to the
specified EMSS Control Units.
Refer to the manual.
-6-