Trane Duplex Water-Cooled Hermetic CenTraVac Installation Manual page 16

Figure 5 – Recommended Lifting Arrangements for CDHF
A
B
Jacking Points
TYPE NTON
CDHF 1500-2000
CDHF 2100-2500
CDHG 1250-1750
CDHG 2150
CDHG 2150
CDHF 3000
CDHF 3500
Notes:
1. Lifting chains (or cables) are not the same length between point A and B, or between points A and C. Adjust as
necessary for an even lift.
2. Lifting holes provided on chillers to attach chains are 2 1/2 inch in diameter.
3. Attach safety chain (or cable) as shown, and without tension. The safety chain is not used for lifting, but is there to
prevent the unit from rolling.
4. Do not fork-lift the unit.
16
General Information
Safety Chain
H
C
EVSZ CDSZ
210D 210D
250D 250D
210D 210D
210D 210D
250D 250D
250M 250M
250X 250X
Y
X
Safety
Chain
X
143 in.
143 in.
143 in.
143 in.
143 in.
172 in.
199 in.
LIFTING BEAM
Y H
23 ft 24.75 in
23 ft 24.75 in
23 ft 24.75 in
23 ft 24.75 in
23 ft 24.75 in
27.5 ft 24.75 in
31.5 ft 24.75 in
CDHF-SVN01B-EN