License Agreement; Getting Started - Franklin QC-20 User Manual

License Agreement

READ THIS LICENSE AGREEMENT BEFORE USING
THIS PRODUCT.
YOUR USE OF THE PRODUCT DEEMS THAT YOU AC-
CEPT THE TERMS OF THIS LICENSE. IF YOU DO NOT
AGREE WITH THESE TERMS, YOU MAY RETURN THIS
PACKAGE WITH PURCHASE RECEIPT TO THE DEALER
FROM WHICH YOU PURCHASED THE PRODUCT AND
YOUR PURCHASE PRICE WILL BE REFUNDED. PROD-
UCT means the software product and documentation found
in this package and FRANKLIN means Franklin Electronic
Publishers, Inc.
LIMITED USE LICENSE
All rights in the PRODUCT remain the property of FRANK-
LIN. Through your purchase, FRANKLIN grants you a per-
sonal and nonexclusive license to use the PRODUCT on a
single unit at a time. You may not make any copies of the
PRODUCT or of the data stored therein, whether in elec-
tronic or print format. Such copying would be in violation of
applicable copyright laws. Further, you may not modify,
adapt, disassemble, decompile, translate, create derivative
works of, or in any way reverse engineer the PRODUCT.
You may not export or reexport, directly or indirectly, the
PRODUCT without compliance with appropriate governmen-
tal regulations. The PRODUCT contains Franklin's confiden-
tial and propriety information which you agree to take
adequate steps to protect from unauthorized disclosure or
use. This license is effective until terminated. This license
terminates immediately without notice from FRANKLIN if you
fail to comply with any provision of this license.
1

Getting Started

1. Press ON/OFF.
The Quick Demo appears. You can stop
the demo at any time by pressing CLEAR.
2. Press or to adjust the contrast
at the Ready screen.
You can only adjust the contrast at this
screen.
Resuming Where You Left Off
If you forget to turn this product off,
it will automatically shut off within two
minutes. To return to the last display
that you viewed, press ON/OFF.
Disabling the Demo
You probably do not want to view the
Quick Demo every time you start. To
disable the demo, type
Ready screen, then press ENTER. To
enable the demo, enter
d at the
d again.
2