Filter - TP-Link TD-8816 User Manual

ACL: If Activated, the IP addresses which are contained in the Access Control List can
access to the Router. If Deactivated, all IP addresses can access to the Router.
ACL Rule Index: Select the ACL rule index for the entry.
Active: Enable the ACL rule.
Secure IP Address: Select the IP addresses which are permitted to access to the Router
remotely. With the default IP 0.0.0.0, any client would be allowed to remotely access the
ADSL Router.
Application: Select the application for the ACL rule, and then you can access the Router
through it.
Interface: Select the interface for access: LAN, WAN or Both.
Access Control of Listing: This displays the information about the ACL Rules.

4.5.2 Filter

Choose "Access Management→Filter", you can see the Filter screen (the default is IP/MAC
Filter screen shown in ). The filtering feature includes IP/MAC Filter, Application Filter, URL Filter.
The feature makes it possible for administrators to control user's access to the Internet, protect
the networks.
4.5.2.1. IP Filter
Select IP/MAC Filter as the Filter type, and select IP as the Rule type (shown in Figure 4-30),
then you can configure the filter rules based on IP address. The filtering includes Outgoing and
Incoming, the detailed descriptions are provided below.
TD-8816 ADSL2+ Modem Router User Guide
35