Storage; Specifications - Echo 99944200595 Operator's Manual

s
Torage
IMPORTANT
Always store and transport hedge clippers in a stable position.
Support gear case and cutting blades to prevent excessive flex-
ing which may cause damage to the cutting attachment. Always
install blade cover when transporting or storing unit.
1. Clean and lubricate cutting blades and gear case.
2. Sharpen cutting blades as required.
3. Apply a light coating of clean 20W engine oil along entire length
of blades and on blade bolts.
4. Install blade cover onto hedge clipper cutting blades.
5. Store hedge clipper attachment in a dry, dust free place out of the
reach of children, using supplied storage hook.
Storage Hook Installation
1. Insert small end of hook into locating hole on attachment shaft.
2. Slide plastic cap onto end of attachment shaft.
s
peCIfICaTIons
PAS Articulating Hedge Clipper Attachment
Length ------------------------------------------------------- 1016 mm (40.0 in.)
Attachment Width ----------------------------------------- 132 mm (5.2 in.)
Height ------------------------------------------------------- 127 mm (5.0 in.)
Weight ------------------------------------------------------ 2.76 kg. (6.08 lb.)
Gear Case Ratio -------------------------------------------- 4.072 : 1
Cutter -------------------------------------------------------- Double Reciprocating Blade - Double Edge
Effective Length ----------------------------------------- 464 mm (18.3 in.)
Pitch ------------------------------------------------------- 35 mm (1.4 in.)
Maximum Diameter Cut
Soft Material ---------------------------------------------- 25.4 mm (1 in.)
Woody Material ------------------------------------------- 13 mm (1/2 in.)
PAS A
rticulAting
H c
edge liPPer
O
PerAtOr
15
A
ttAcHment
' m
S AnuAl