Table of Contents
Advertisement
o
peraTIon
WARNING
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all
openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete
stop before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service.
adjusTIng CuTTIng angle
WARNING
Never adjust cutting assembly with engine running.
WARNING
Hedge clipper blades are sharp. Always wear gloves when adjust-
ing cutting assembly, otherwise serious injury may result.
WARNING
DO NOT stand hedge clipper on end when adjusting cutting angle,
otherwise serious injury may result
1.
Place unit on a flat clear area. Assure stop switch is in the "STOP"
position.
2.
Pull out indexing ring (A), and turn ¼ turn to lockout position.
3.
Turn hedge clipper ¼ turn so that indexing ring faces downward.
4.
Release hand-guard blade lock (B) with right hand, while holding
blade-adjustment handle (C) with left hand.
5.
Rotate blades to desired cutting position and hold in place.
6.
Turn indexing ring ¼ turn to lock blade in place.
WARNING
Gear case assembly becomes HOT during use. Always grip as-
sembly at blade-adjustment handle when making cutting angle
adjustments, otherwise serious injury may result.
IMPORTANT
Always install blade cover, and return cutting assembly to folded/
locked position for travel/storage.
PAS A
rticulAting
H
c
edge
liPPer
O
PerAtOr
A
B
9
A
ttAcHment
'
m
S
AnuAl
B
C
Advertisement
Table of Contents
