Doing A Factory Reset; Resetting Your Bookman - Franklin BOOKMAN Sidekick SDK-763 User Manual

Expandable electronic book
Table of Contents

Advertisement

Doing a Factory Reset

Warning: Doing a factory reset per-
manently erases all the records saved
in your BOOKMAN Sidekick. Unless
you want to erase all your information,
do not perform a factory reset.
In addition, when you do a factory re-
set, any settings that you have
changed, such as the screen contrast
or help message language, are reset
to their default settings. Also, all
sample cardfiles or note folders (e.g.,
Folder 1 ) will be restored but they will
not contain any notes or cards.
1. Press MENU.
2. On the Setup menu, highlight
Factory Reset.
3. Press ENTER.
4. Press F to start the factory
reset. Or press any other key
to exit without doing a
factory reset.

Resetting Your BOOKMAN

If the BOOKMAN keyboard fails to re-
spond, or if its screen performs errati-
cally, first press CLEAR and then press
ON/OFF twice. If nothing happens, fol-
low the steps below to reset it.
Warning: Pressing the reset button
with more than very light pressure may
permanently disable your BOOKMAN
Sidekick. In addition, resetting your
BOOKMAN Sidekick restores certain
settings to their defaults, and may
erase user-entered information in any
installed book cards.
1. Hold CLEAR and press ON/OFF.
If nothing happens, try Step 2.
2. Use a paperclip to gently
press BOOKMAN's reset
button.
The reset button is recessed in a
pin-sized hole on the back of your
BOOKMAN.
This unit may change operating modes due
to Electro-static Discharge. Normal opera-
tion of this unit can be re-established by
pressing the reset key, ON/OFF, or by re-
moving/replacing batteries.
67

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bookman sidekick sdk-765

Table of Contents

Save PDF