What Version 7 Users Need To Know; Upgrading To Dymo Label V.8 (Windows); Upgrading To Dymo Label V.8 (Mac); Label Files - Dymo Label v.8 User Manual

What Version 7 Users Need
If you are used to working in DYMO Label software Version 7.8 and earlier, this chapter
offers some important information you need to know when working in DYMO Label v.8.

Upgrading to DYMO Label v.8 (Windows)

The first time you start DYMO Label v.8, the DYMO Label First Run wizard guides you
through the following procedures:
n
n
n

Upgrading to DYMO Label v.8 (Mac)

Many of your previous settings are imported when you install DYMO Label v.8. Some of
the settings that are imported from earlier versions of the software include: your default font,
default label file folder, default return address, and your startup label settings.

Label Files

Label Files that you create are now stored in the following default folder:
Windows: ...\Libraries\Documents\DYMO Label\Labels
Mac: Documents/DYMO Label Software/Labels

Address Book

Address Books are now stored in the following folder:
Importing your settings from an earlier version of the software
Many of your previous settings can be imported; including your default font, default
return address, and your startup label settings. In addition, all of the LabelWriter label
files in your default label file folder are automatically converted to the new label format
and copied into the new default Labels folder. Also, all of your Address Books are
automatically converted to the new Address Book format and copied into the new
default Address Books folder.
Choosing to participate in the DYMO Product Improvement Program
Registering your DYMO label printer
You can open all of your Version 7 LabelWriter label files with DYMO Label v.8.
However, DYMO Label v.8 cannot open tape labels created in earlier versions of the
software.
Chapter 2
to Know
5