Configuring The Server; Changing The Server Name And Description - Dymo LabelWriter Print Server User Manual

For labelwriter 400 or later series printers
Hide thumbs Also See for LabelWriter Print Server:
Table of Contents

Advertisement

Configuring the Server

From the Print Server Configuration page, you can change the server name and description,
configure the IP address, change the administrator name and password, and perform maintenance
on the print server.
To access the print server Configuration page
1
2

Changing the Server Name and Description

You can change the name and description of the print server. If you have more that one print server
connected to your network, giving each server a distinct name or description makes it easy to
distinguish between servers.
To change the server name and description
1
2
3
4
Click Config at the top of the Print Server home page.
Enter the following in the Administrator and Password fields, and then click Login.
Administrator: admin
Password: admin
Note
These are the default settings. See "Changing the Administrator Name and Password"
on page 22 for information on how to change the administrator name and password.
Click General Configuration on the left side of the Configuration page.
Enter a new name for the server in the Server Name field.
Enter a new description for the server in the Server Description field.
Click Submit.
The print server name and description are updated.
Configuring the Server
21

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LabelWriter Print Server and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents

Save PDF