Processing Bowls & Lid; Blades & Spindle - Dualit Compact Food Processor Instruction Manual & Guarantee

Dualit DMP New format AMIT edit._07.10_Layout 1 09/07/2010 10:33 Page 8
PROCESSING BOWLS & LID
You will always need to use the large bowl first, no matter what other bowls and
attachments you wish to use.
1 2
POSITION BODY
Before you assemble the Place the large bowl onto
food processor, ensure that the main body, with the
the power cord is unplugged,
handle pointing to the right
and placed facing you on a (4 o'clock).
dry, level surface. Push down
on the body to secure firmly.
1 2
ADDITIONAL
BOWLS
When using the medium To attach the lid, place it on
bowl, insert this into the the large bowl aligning to
large bowl; it will self-locate. the slots on the bowl rim.
If using the optional small
bowl, place this into the
meduim bowl.
3
LARGE BOWL LOCK LARGE BOWL
CLICK
Hold the handle and turn it
clockwise until you hear and
feel it lock in place.
3
ATTACH THE LID LOCKING THE LID
Hold the large bowl handle
with one hand, with your
other hand, hold the base of
the feed tube and rotate
clockwise to lock.
8
BLADES & SPINDLE
WITH THE EXCEPTION OF THE CHOPPING BLADES ALL ATTACHMENTS MUST BE
FIRMLY ATTACHED TO THE SPINDLE.
1 2
LARGE BLADE MEDIUM BLADE
Handle blades and The medium chopping blade
attachment using only the also locates directly onto the
centre plastic section. The
bowl drive, once both large
large chopping blade locates and medium bowls are in
directly onto the bowl drive, place.
once the large bowl is
locked in place.
SPINDLE IN SPINDLE IN
1 2
LARGE BOWL MEDIUM BOWL
2nd
1st
The drive shaft locates on When using the medium
the bowl drive on the large bowl, place the medium
processing bowl. bowl in the large bowl then
the drive shaft on the bowl
drive.
3
SMALL BLADE
3rd
2nd
1st
The small chopping blade
needs to be used with the
spindle. This must be
attached to the bowl drive
once the large and medium
bowls are in place.
SPINDLE IN
3
SMALL BOWL
When using the optional small
bowl with blade, place in the
large bowl with medium bowl,
drive shaft in position, then
place the small bowl & small
blade on the drive shaft.
9