Processing Bowls & Lid; Blades & Spindle - Dualit XL1500 Instruction Manual

PROCESSING BOWLS & LID
You will always need to use the large bowl first, no matter what other bowls and
attachments you wish to use.
2
POSITION BODY LARGE BOWL
Before you assemble the food Place the large bowl onto
processor, ensure that the
the main body, with the
power cord is unplugged, and
handle pointing to the right
placed facing you on a dry,
(four o'clock).
level surface. Push down on
the body to secure firmly.
2
ADDITIONAL ALIGN BOWLS
BOWLS
When using the medium The medium bowl will
bowl, insert this into the self-locate into the large
large bowl. When using the bowl. The groove on the
small bowl insert this into small bowl must allign with
the medium bowl. the pip on the medium
Small bowl must be used bowl.
with the medium bowl.
3
LOCK LARGE BOWL
CLICK
Hold the handle and turn it
clockwise until you hear and
feel it lock in to place.
3
ATTACH LID &
LOCK INTO PLACE
To attach the lid, place it on
the large bowl aligning to
the slots on the bowl rim. To
lock, hold the large bowl
handle, and with your other
hand, hold the base of the feed
tube and rotate clockwise.
8
2nd
BLADES & SPINDLE
Do not Use blaDes for longer than 45 seconDs at a time.
processer to cool if you go over the max run time. CAUTION, BLADES ARE VERY SHARP .
1st
LARGE BLADE
Handle blades and attachment
CLICK
using only the central plastic
section. The large chopping
blade locates directly onto
the bowl drive, once the large
bowl is locked in place.
SPINDLE IN
LARGE BOWL
2nd
1st
LOCK
The spindle locates on to
the bowl drive on the large
processing bowl.
3rd
2nd
2nd
1st
3
2
MEDIUM BLADE 1st SMALL BLADE
3rd
2nd
CLICK
2nd
1st
1st
The medium chopping blade The small chopping blade
also locates directly onto the needs to be used with the
bowl drive, once both large spindle. This must be
and medium bowls are in attached to the bowl drive
place. once the large and medium
bowls are in place, and before
locating the small bowl.
SPINDLE IN SPINDLE IN
2 3
MEDIUM BOWL SMALL BOWL
3rd
2nd
2nd
1st
1st
When using the medium When using the small bowl
bowl, place it in the large with blade, place in the large
bowl then the spindle on the bowl with medium bowl,
bowl drive. spindle in position, then place
the small bowl and small blade
on the spindle.
9
1st
Allow
2nd
1st
2nd
1st
2nd
1st