Draytek Vigor2950 Series User Manual page 59

Enable Open Ports
Comment
WAN Interface
WAN IP
Local Computer
Choose PC
Protocol
Start Port
End Port
Vigor2950 Series User's Guide
Check to enable this entry.
Make a name for the defined network application/service.
Specify the WAN interface that will be used for this entry.
Such drop down list will be shown only if you have entered other
WAN IP address in WAN IP Alias window. Choose one of them
to apply open port configuration.
Enter the private IP address of the local host or click Choose PC to
select one.
Click this button and, subsequently, a window having a list of
private IP addresses of local hosts will automatically pop up. Select
the appropriate IP address of the local host in the list.
Specify the transport layer protocol. It could be TCP, UDP, or -----
(none) for selection.
Specify the starting port number of the service offered by the local
host.
Specify the ending port number of the service offered by the local
host.
49