Draytek Vigor2950 Series User Manual page 109

Profile Name
VPN Dial-Out Through
Always On
Pre-Shared Key
Vigor2950 Series User's Guide
Type a name for such profile. The length of the file is
limited to 10 characters.
Use the drop down menu to choose a proper WAN
interface for this profile. This setting is useful for dial-out
only.
WAN1 First - While connecting, the router will use
WAN1 as the first channel for VPN connection. If
WAN1 fails, the router will use another WAN interface
instead.
WAN1 Only - While connecting, the router will use
WAN1 as the only channel for VPN connection.
WAN2 First - While connecting, the router will use
WAN2 as the first channel for VPN connection. If
WAN2 fails, the router will use another WAN interface
instead.
WAN2 Only - While connecting, the router will use
WAN2 as the only channel for VPN connection.
Check to enable router always keep VPN connection.
IKE Authentication Method usually applies to those are
remote dial-in user or node (LAN to LAN) which uses
dynamic IP address and IPSec-related VPN connections
99