Keyless Enter-N-Go - Dodge Journey 2011 Owner's Manual

Hide thumbs Also See for Journey 2011:
Table of Contents

Advertisement

34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
3. Repeat Steps 1 and 2 for the opposite rear door.
NOTE: After disengaging the Child-Protection Door
Lock system, always test the door from the inside to
make certain it is in the desired position.

KEYLESS ENTER-N-GO

The Passive Entry system is an enhancement to the
vehicle's Remote Keyless Entry (RKE) system and a
feature of Keyless Enter-N-Go. This feature allows you to
lock and unlock the vehicle's door(s) without having to
press the RKE transmitter lock or unlock buttons.
NOTE:
• Passive Entry may be programmed ON/OFF; refer to
"Uconnect Touch™ Settings" in "Understanding Your
Instrument Panel" for further information.
• If wearing gloves on your hands, or if it has been
raining on the Passive Entry door handle, the unlock
sensitivity can be affected, resulting in a slower re-
sponse time.
• If the vehicle is unlocked by the RKE transmitter or
Passive Entry and no door goes ajar within 60 seconds,
the vehicle will re-lock and if equipped will arm the
theft alarm.
To Unlock From The Driver's Side:
With a valid Passive Entry RKE transmitter within 5 ft
(1.5 m) of the driver's door handle, grab the driver's front
door handle to unlock the driver's door automatically.
The interior door panel lock knob will raise when the
door is unlocked.

Advertisement

Table of Contents
loading

Table of Contents