Dimplex PowerChef TBQ-120-REG Owner's Manual page 26

26
5. Flip with spatula*.
6. Cook flip side until crisp - approximately 1 minute*.
7. Remove with spatula.
* If second side cooking is not desired, simply remove
egg(s) with spatula.
CAUTION: Skillet can achieve very high temperatures
and remain hot. Allow Skillet to cool at least 30 minutes
before attempting to remove from grill.
Light Accessory
Follow the procedure outlined in step 10 on page 16 to install
the Light Accessory. Once installed, the Light's four (4)
wide angle white LEDs will provide brilliant light in low light
conditions or during night time grilling.
To operate, press in the clear lens section of the light until it
clicks to turn the Light on. Press again to turn the Light off
(Figure 6).
Figure 6
Wide angle white LEDs (4)
Battery Replacement Procedure
1. Release Light accessory from mounted backing by sliding
Light to the side. Direction will depend on how it was
installed (Figure 7).
Figure 7
TBQ-120-DLX Accessories
Clear lens section
Light Accessory
2. Once Light is free, the batteries are exposed on the
back of the unit (Figure 8). Replace with three (3) AAA
batteries and match positive and negative terminals as
inscribed on the Light.
Figure 8
Grooves that match
with posts from rear cover
Figure 9
Posts that match with
grooves on rear surface of Light unit
3. To reinstall Light, align wide sides of grooves on back of
Light with posts on back cover of Light (Figure 9) which is
adhered to the inside of the hood of the grill and slide unit
until edges of back cover and Light are flush.
For the complete line of electric BBQs and accessories
contact your authorized Dimplex dealer or visit us on the web
at www.dimplexoutdoors.com.
Batteries (3)
Back cover of Light stuck to
inside surface of Hood