Temperature Options; Report - Volvo STD 420-0003 Standard

6.2.4.3 Calculating the fogging value G
To calculate G in mg, the value of G j is calculated for each glass plate by using:
G = G – G
j 1 0
where
G is fogging mass of condensation on each piece of aluminium foil
j
G is the mass of the aluminium foil after the test, in mg
1
G is the mass of the aluminium foil before the test, in mg
0
The fogging value G is the mean value of G

7 Report

The report shall contain:
- Reference to this standard
- Reference to mehod used (method F evaluation of fogging using a glossmeter or method G gravimetrical
method, evaluation of fogging using a balance)
- Identification of test pieces
- Date of production
- Type of test pieces
- Thickness of the test pieces
- Date of test
- Person responsible for testing
- Any deviations from standard
- Results: mean value and individual values
- Number of test pieces tested
- Any particular observations.

8 Temperature options

The temperature shall be stated in the documentation referring to this standard.
Standard
Volvo Group
. G is reported with an accuracy of 0,01 mg.
j
Printed copies are uncontrolled. Print date: 2006-07-07
STD 420-0003
1
Version Page
11