Unlocking Doors With The Key Blade; Removing The Key Blade; Inserting The Key Blade - Volvo XC60 Owner's Manual

02 Locks and alarm
Remote control key/key blade

Removing the key blade

02
Slide the spring-loaded catch to the side.
At the same time pull the key blade straight
out backwards.

Inserting the key blade

Carefully refit the key blade in place in the
remote control key, to avoid damaging it.
1. Hold the remote control key with the slot
pointed up and lower the key blade into its
slot.
2. Lightly press the key blade. You should
hear a "click" when the key blade is locked
in.
46

Unlocking doors with the key blade

If central locking cannot be activated with the
remote control key, e.g. if the batteries are dis-
charged, then the driver's door can be opened
as follows:
NOTE
When the driver's door is unlocked using the
key blade and is opened, the alarm is trig-
gered.
1. Unlock the driver's door using the key
blade in the door handle's keyhole.
2. Deactivate the alarm by inserting the
remote control key in the ignition switch.