Volvo XC90 Owner's Manual page 263

Seek – scroll forward or back when enter-
ing text and numbers.
Number/character buttons and menu
shortcuts.
Remember
The menus are controlled from the centre con-
sole and the steering wheel keypad. For gen-
eral information on menus, see page 236.
NOTE
If the car is equipped with both
TM
Bluetooth handsfree and built-in phone
then there is an additional menu in the
phone menu, see page 266.
Activate/deactivate
A short press on PHONE activates the hands-
free function. The text PHONE at the top of the
display shows that it is in phone mode. The
symbol shows that the handsfree func-
tion is active.
One long press on PHONE deactivates the
handsfree function and disconnects a con-
nected phone.
Connect mobile phone
A mobile phone is connected in different ways
depending on whether or not it has been con-
nected previously. To connect a mobile phone
for the first time, follow the instructions below:
Alternative 1 - via the car's menu system
1. Make the mobile phone detectable/visible
TM
via Bluetooth , see the mobile phone's
manual or www.volvocars.com.
2. Activate the handsfree function with
PHONE.
> Menu option Add phone
the display. If one or more mobile
phones have already been registered
then these are also shown.
3. Select Add phone .
> The audio system searches for mobile
phones in the vicinity. The search takes
approximately 30 seconds. The mobile
phones detected are specified with their
TM
respective Bluetooth name in the dis-
play. The handsfree function's
TM
Bluetooth name is shown in the
mobile phone as My Volvo Car
4. Choose one of the mobile phones in the
audio system display.
5. Enter the number series shown in the audio
system display via the mobile phone key-
pad.
10 Infotainment system
Alternative 2 - via the phone's menu system
1. Activate the handsfree function with
PHONE. If there is a phone connected,
disconnect the connected phone.
2. Search with the phone's Bluetooth
the mobile phone's manual.
3. Select My Volvo Car
detected in your mobile phone.
appears on
4. Enter the PIN code '1234' into the mobile
phone when prompted for the PIN code.
5. Select to connect to
the mobile phone.
The mobile phone is registered (paired) and
connected automatically to the audio system
while the text
display. For more information on how mobile
phones are registered, see page 265.
When the connection is established the symbol
is shown and the mobile phone's
TM
.
Bluetooth name is shown in the display. Now
the mobile phone can be controlled from the
audio system.
To call
1. Make sure that the text
at the top of the display and that the
symbol is visible.
*
Option/accessory, for more information, see Introduction.
Bluetooth handsfree*
TM
, see
in the list of units
My Volvo Car from
Synchronising is shown in the
PHONE is shown
10
``
263