Adjusting The Wired Settings; Setting Up A Wireless Connection Manually - Vizio VBR135 User Manual

Adjusting the Wired Settings

If your player is connected to your home network with an ethernet
cable, the player will automatically detect the connection. You
can manually adjust the settings, but VIZIO recommends this for
advanced users only.
To adjust the wired settings:
1. From the Network Menu, use
the Arrow buttons on the
remote to highlight IP Setting
and press OK.
2. Use the Arrow buttons on the remote to highlight Manual
and press OK.
To change the individual IP settings, IP Mode must be set to
Manual.
3. Use the Arrow and OK buttons
on the remote to change each
of the IP Mode settings:
• IP Address
• Subnet Mask
• Default Gateway
• DNS1
• DNS2
If you are unsure what values to enter, contact your Internet
Service Provider (ISP) for assistance.
4. When you are finished, highlight Apply and press OK.

Setting Up a Wireless Connection Manually

If you have a wireless home network, including a wireless router
or modem and an internet connection, you can set up the player
to connect wirelessly.
To set up a wireless connection manually:
1. From the Network Menu, use
the Arrow buttons on the
remote to highlight Wireless
Setting and press OK.
2. Use the Arrow buttons on the
remote to highlight Scan and
press OK.
A list of available wireless
networks is displayed.
3. Use the Arrow buttons on the
remote to highlight the name
of your home wireless network,
then press OK.
If your network is password-
protected, you are prompted
to enter a password. Enter your
password using the remote.
When finished, highlight Next
and press OK.
28
4