Adjusting The Network Settings; Adjusting The Wired Settings - Vizio VBR140 User Manual

AdjuSting the network SettingS

In order to access BD-Live or Internet Apps, your player must be
connected to your home network and to the internet.
To access the Network menu:
1. Turn on the player and your TV.
Use the Arrow buttons on the
remote to highlight Settings
and press OK.
The Settings menu is displayed.
2. Use the Arrow buttons on the
remote to highlight Network
and press OK.

Adjusting the Wired Settings

If your player is connected to your home network with an ethernet
cable, the player will automatically detect the connection. You
can manually adjust the settings, but VIZIO recommends this for
advanced users only.
To adjust the wired settings:
1. From the Network Menu, use
the Arrow buttons on the
remote to highlight IP Setting
and press OK.
2. Use the Arrow buttons on the remote to highlight Manual
and press OK.
To change the individual IP settings, IP Mode must be set to
Manual.
3. Use the Arrow and OK buttons
on the remote to change each
of the IP Mode settings:
• IP Address
• Subnet Mask
• Default Gateway
• DNS1
• DNS2
If you are unsure what values to enter, contact your Internet
Service Provider (ISP) for assistance.
4. When you are finished, highlight Apply and press OK.
28
4