Adjusting The Network Settings; Adjusting The Wired Settings - Vizio VBR337 User Manual

VBR337

Adjusting the Network Settings

In order to access BD-Live or Internet Apps, your player must be connected to
your home network and to the internet.
To access the Network menu:
1. Turn on the player and your TV. Use
the Arrow buttons on the remote to
highlight Settings and press OK.
The Settings menu is displayed.
2. Use the Arrow buttons on the remote
to highlight Network and press OK.
The Network drop-down menu is
displayed.

Adjusting the Wired Settings

If your player is connected to your home network with an ethernet cable, the
player will automatically detect the connection. You can manually adjust the
settings, but VIZIO recommends this for advanced users only.
To adjust the wired settings:
1. From the Network Menu, use the
Arrow buttons on the remote to
highlight Wired and press OK.
The Wired menu is displayed.
2. Use the Arrow buttons on the remote
to highlight IP Mode and press OK.
Use the Arrow buttons to select Off,
Dynamic, or Manual and press OK.
To change the individual IP settings, IP Mode must be set to Manual.
3. Use the Arrow and OK buttons on the
remote to change each of the IP Mode
settings:
• IP Address
• Subnet Mask
• Gateway
• Primary DNS
• Secondary DNS
If you are unsure what values to enter, contact your Internet Service
Provider (ISP) for assistance.
4. When you are finished, highlight Apply and press OK.
4
29