Activating Or Deactivating Disc Autoplay; Enabling Or Disabling Cec Support; Setting Power Down Mode - Vizio VBR140 User Manual

Activating or Deactivating Disc Autoplay

When this option is activated, the player will automatically play
an inserted disc.
When this option is deactivated, you will need to select Play Disc
to play a disc.
Autoplay does not mean that the player will start a movie.
The disc will load and usually the disc's main menu will be
displayed.
To Activate/Deactivate Disc Autoplay:
1. From the System menu, use the
Up/Down Arrow buttons on the
remote to highlight Disc Auto
Playback and press OK.
2. Using the Up/Down Arrow buttons on the remote, highlight
On or Off, then press OK.

Enabling or Disabling CEC Support

When enabled, CEC (Consumer Electronic Control), allows you
to control your Blu-ray player using your TV remote. For CEC to
work, your player must be connected to your TV with an HDMI
cable, and your TV must support CEC. (Not all manufacturers
enable CEC for all products.)
To enable or disable CEC support:
1. From the System menu, use the Up/Down Arrow buttons on
the remote to highlight CEC and press OK.
2. Use the Arrow buttons to highlight On or Off, then press OK.

Setting Power Down Mode

The player has two Power Down Modes for you two choose from.
To select the different Power Down Modes:
1. From the System menu, use the
Up/Down Arrow buttons on
the remote to highlight Power
Down Mode and press OK.
2. Use the Arrow buttons to highlight Energy Saving or Quick
Start.
• Energy Saving: Powers the player down to a full standby.
• Quick Start: Keeps the player suspended for a quick
power on.
26
4