Table of Contents
Advertisement
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
How to Configure Station Network Settings
Select the target station from the hierarchical management tree, then click Configuration
> Station Settings > Network Settings on the menu bar (or right-click the station on the
hierarchical management tree and select Station Settings > Network Settings). The Network
Settings window will pop up.
Port Settings
Server port: The default server port is set to 3454. If you
change the server port, please enter the new value while
logging the LiveClient next time.
RTSP port: The RTSP (Real-Time Streaming Protocol)
controls the delivery of streaming media. By default, the port
number is set to 554.
UPnP Settings
Enable UPnP port forwarding: For client to access the
VAST Server from the Internet, select this option to allow
the server to open ports on the router automatically so the
video streams can be sent out from a LAN. To utilize of this
feature, make sure that your router supports UPnP
is activated.
Enable UPnP presentation: If you select this option,
shortcuts to VAST Server will be listed in My Network
Places.
Proxy Settings
In this section, you can enable, modify, or cancel Proxy Settings for VAST Server if your network
devices are set up under a proxy.
Web Access Settings
User can access VAST LiveClient and Playback via Internet web browser (
or local host -->
http://127.0.0.1:3454.
F
78 - User's Manual
TM
and it
http://IP address:3454
).
Advertisement
Table of Contents
