Table of Contents
Advertisement
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
PTZ Mouse Control
The "Mount type" setting also determines the display modes available to your display modes.
Please refer to fisheye camera's User Manual for more information.
A highly versatile mouse control is implemented with fisheye cameras. The same control takes
effect on a browser management session, on the LiveClient utility, and even on a video playback
screen. See the drawing below for how it works.
You can click and hold down the left mouse button to quickly swipe through the field of view,
change the view angle, or use the mouse wheel to zoom in/out on a region of interest. However,
the PTZ mouse control is only available in the "R" (Regional) mode. In the Panoramic mode,
you can only scroll horizontally across the 180º or 360º panoramic view.
1O3R (Original & Regional) Mode Screen Control
Zoom Out
Zoom In
Click to bring into
center of view
The various display modes require the support of D3D technologies by your display card on the
LiveClient or Playback station. Most off-the-shelf display cards today support this feature.
The onscreen mouse control is very agile. Therefore, use the PTZ panel for more delicate
moves in a field of view. Pan and Patrol moves are also supported if you have configured
preset PTZ positions in the camera's firmware. Note that the Pan move takes place in the
Panoramic and Regional views, while the Patrol function through preset positions applies only in
the Regional views.
40 - User's Manual
1
3
2
Pan or tilt
Interactive
regional FOV indicators
Current screen selection
Click and hold down
the button
Advertisement
Table of Contents
