Table of Contents
Advertisement
e. The Device List window will pop up. Select one or more devices and set the Notification Type.
Depending on the trigger source, the Notification Type will be different. Then click OK to close the
window.
f. The trigger source(s) will be listed on the window as shown below. If you want to add more Trigger
sources, click Add and repeat d.~e. Then click Next to assign action(s) to the trigger source(s).
g. Click Add to open the Action Settings window.
f
There are several types of Action Settings.
Email: The sever will send a notification via e-mail when a trigger is activated.
h. To enable this function, please set up the SMTP server first. Click SMTP Setting to open the
window and refer to page 106 for detailed information.
i. Enter the related informtaion. You can modify the mail content in the blank. If you want to modify the
content, click Insert Macro to select the parameter. When completed, click OK on the bottom to
enable the setting.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
i
g
h
User's Manual - 65
Advertisement
Table of Contents
