Table of Contents
Advertisement
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
How to Manually Begin /Stop Recording
By default, all devices are assigned to the default recording storage and default recording
schedule. Therefore, once you insert a device onto the station, the VAST Server will begin
to record live video according to the default recording schedule. Please refer to How to Edit
Recording Schedules on page 83.
However, if you have changed the default schedule, you can manually click Manually Begin
Recording to enable a device without setting up a recording schedule. Please follow the
instructions below to manually begin recording.
Select the device from the hierarchical management tree under Default Group, then click Edit
> Manually Begin Recording on the menu bar (or right-click the device and select Manually
Begin Recording). The string on the menu bar will turn into Manually Stop Recording as
shown below and the VAST Server will start to record video from the target camera. Please
note that its priority will be higher than the recording schedule, so it will continue unless you
click Manually Stop Recording. After you click Manually Stop Recording, the device will then
follow the preset recording schedule.
User's Manual - 101
Advertisement
Table of Contents
