Vivotek FD8151V User Manual page 105

VIVOTEK
In the Event settings column, the Servers and Medias you configured will be listed; please make sure the
Event -> Status is indicated as ON, in order to enable the event triggering action�
When completed, click Save event to enable the settings and click Close to exit Event Settings page�
The new Event / Server settings / Media will appear in the event drop-down list on the Event setting
page�
Please see the example of the Event setting page below:
When the Event Status is ON, once an event is triggered by motion detection, the Network Camera will
automatically send snapshots via e-mail�
If you want to stop the event trigger, you can click ON to turn it to OFF status or click Delete to remove
the event setting�
To remove a server setting from the list, select a server name from the drop-down list and click Delete�
Note that you can only delete a server setting when it is not applied to an event setting�
To remove a media setting from the list, select a media name from the drop-down list and click Delete�
Note that you can only delete a media setting when it is not applied to an event setting�
User's Manual - 105