Vivotek IP8152 User Manual page 49

■ Iris mode (available for IP8152 using a DC-iris lens): Select Indoor or Outdoor iris mode to
adapt to the installation. The preset iris aperture setting will apply.
You can click Restore to recall the original settings without incorporating the changes. When
completed with the settings on this page, click Save to enable the settings.
If you want to configure another sensor setting for the schedule mode, please click Profile to open
the Profile of exposure settings page as shown below.
Activated period: Select the period of time this profile setting will apply to. Please manually enter
a range of time in a day, fune the Measurement window and Exposure control settings, and then
cliack Save for the configuration to take effect.
Please follow the steps below to setup a profile:
1. Select Enable and apply this profile to.
2. Select Day mode, night mode, or Schedule time
by entering a range of time for this profile to
apply to.
3. Select the Measurement window setting.
4. Configure Exposure control settings in the
folowing columns. Please refer to previous
dicussions for detailed information.
5. Click Save to enable the setting and click Close
to exit the page.
VIVOTEK
User's Manual - 49