Vivotek IP8152 User Manual page 112

VIVOTEK
A green bar indicates that even though motions have been detected, the event has not been triggered
because the image variations still fall under the defined threshold.
Percentage = 30%
If you want to configure other motion detection settings for a different time period within a day, please
click Profile to open the Motion Detection Profile Settings page as shown below. A total of three motion
detection windows can be configured on this page as well.
Video(TCP-AV)
2010/12/10 17:08:56
corridor
Please follow the steps beolw to set up a profile and additional motion detectio windows in it:
1. Create a new motion detection window.
2. Check Enable this profile.
3. Select the applicable span of time in Day, Night, or the Schedule mode. Please manually enter a time
range if you choose Schedule mode.
4. Click Save to enable the settings and click Close to exit the page.
This motion detection window will also be displayed on the Event Settings page. You can go to Event
> Event settings > Trigger to configure it as a trigger source. Please refer to page 116 for detailed
information.
112 - User's Manual