Table of Contents
Advertisement
Device Settings
Battery Strength and Network Signal Strength
Your PEEL™ 3200 has 5 LED's located on the back, which indicate
both the device charge as well as the network strength.
Tapping the Power button once will display the battery's charge
followed by the network strength after a brief pause.
5 green LED's indicate a full charge or strongest coverage, while
a single green LED indicates lowest charge or coverage. A single
red LED indicates no battery charge remaining, or no network
coverage. Note that the middle LED will turn on for 0.4 seconds
and then turn o for 1.7 seconds. When the Peel is in Standby
Mode, the middle LED will turn on for 0.4 seconds and turn o
for 3.4 seconds. Press the Power button once to wake the Peel
from Standby Mode. When charging, the middle LED will
remain a solid green.
Note: A fully charged battery provides up to three (3) hours of continuous usage.
Level
LED
5
4
3
2
1
0
12
Advertisement
Table of Contents
